Skip to main content
Conation Technologies

Product Category

DeXel-Filtrate® Particle Analysis Systems

Turn filter-membrane inspection into clear, repeatable cleanliness results. Conation combines the microscope, precision motion, imaging, DeXel-Filtrate® software, OEM database and reporting so your laboratory can move confidently from detected particles to an approved report.

Request Demonstration

particle-analysis-systems-hero.jpg

Recommended source size

1600 × 900 px

Technical Cleanliness Particle Analysis Platform

Reliable particle analysis depends on hardware, software, calibration, standards and reporting working together. DeXel-Filtrate® coordinates each part of that chain so results remain measurable, reviewable and ready for customer documentation.

Precision Hardware

A stable microscope, camera and motion platform keeps imaging controlled and particle measurements repeatable.

Advanced Imaging

High-resolution optics and camera integration reveal the particle detail needed by the selected analysis platform.

Technical Cleanliness Analysis Software

DeXel-Filtrate® detects, measures and classifies particles, then retains the reviewed result for reporting.

Trademark Notice

DeXel-Filtrate® is a trademark of Conation Technologies Pvt. Ltd.

OEM Database & Analytics

Stored customer, component, standard and report-template data makes recurring OEM work faster and more consistent.

Standards-based Measurement

Measurement and classification workflows align with applicable ISO 16232 and VDA 19.1 requirements.

Automated Reporting

Analysis results move directly into repeatable, customer-specific reports for review and documentation.

Models & Variants

Particle-size range, sample volume and required automation determine the analyzer family and model.

stereo-particle-analysis-platform.jpg

Recommended source size

800 × 600 px

Stereo-Based Particle Analysis Platform

Choose this platform for particle measurement above 15 µm, with Semi-Automatic and Automatic variants to match laboratory throughput.

Available models

DeXel-Filtrate II(P)DeXel-Filtrate II(N)DeXel-Filtrate I
Learn More

optical-particle-analysis-platform.jpg

Recommended source size

800 × 600 px

Optical Particle Analysis Platform

Choose this platform for particle measurement above 2 µm, with Semi-Automatic and Automatic variants for higher-resolution cleanliness work.

Available models

DeXel-Filtrate Optical IVDeXel-Filtrate Optical NLVDeXel-Filtrate Optical III
Learn More

One Software. Two Optical Platforms.

Both systems use the same DeXel-Filtrate® software ecosystem while the optical platform is selected around particle size, scanning speed and investigation detail.

Stereo Particle Analysis

  • Large field of view
  • Faster membrane scanning
  • Measures particles typically above 15 µm
  • High-throughput routine cleanliness analysis

Optical Particle Analysis

  • Higher magnification
  • Higher measurement resolution
  • Better fine-particle characterization
  • Detailed cleanliness investigations

DeXel-Filtrate® Software

  • Automated membrane scanning
  • Particle measurement
  • Particle classification
  • Particle counting
  • Repeatable reporting
  • Database integration
  • Standards-based analysis

Microscope Platform Options

Particle size, required image detail, automation and the laboratory's existing optics determine the microscope configuration.

conation-stereo-microscopes.jpg

Recommended source size

600 × 450 px

Conation Stereo Microscopes

Stereo microscope platform options for technical cleanliness particle analysis workflows.

conation-optical-microscopes.jpg

Recommended source size

600 × 450 px

Conation Optical Microscopes

Optical metallurgical microscope platform options for smaller particle measurement workflows.

nikon-stereo-microscopes.jpg

Recommended source size

600 × 450 px

Nikon Stereo Microscopes

Stereo microscope platform options can be configured for supported particle analysis applications.

nikon-optical-microscopes.jpg

Recommended source size

600 × 450 px

Nikon Optical Microscopes

Optical microscope platform options can support technical cleanliness analysis where smaller particle measurement is required.

Microscope Upgrade Program

Upgrade a compatible microscope into a calibrated particle-analysis platform while retaining the optical asset your laboratory already trusts.

Upgrade Your Existing Microscope

Many suitable existing microscopes can be converted into a calibrated particle-analysis system by integrating the appropriate camera, stage, illumination, calibration and DeXel-Filtrate® software. Supported brands include Nikon, Zeiss, Leica, Olympus and other compatible microscopes after technical review.

Integration package

Conation supplies motorized stage, high resolution camera, DeXel-Filtrate® software, integration, calibration, installation and training.

Investment-saving advantage

The upgrade program can help laboratories reuse compatible microscope assets instead of replacing the complete optical platform.

Precision Hardware Platform

Reliable analysis starts with optics, imaging, motion, illumination and calibration engineered to work as one precision hardware platform.

High Resolution Optical System

The optical platform is selected around the particle visibility and measurement range your cleanliness specification requires.

German Industrial Camera

A high-resolution industrial camera captures stable images for dependable analysis and documentation.

High Precision Motion Stages

Precision motion stages scan the filter systematically and return to particle locations for review.

Measurement Performance

Measurement confidence comes from matching optical resolution, calibration and software logic to the particles and classes your specification requires.

High-resolution image scanning

High-resolution scanning preserves the filter detail needed for confident particle detection and later review.

Smallest detectable particle measurement

The measurement range is matched to the smallest detectable particle of the selected optical platform.

Automatic particle sizing

Software sizing reduces repetitive manual work and applies the same measurement logic across the analysis.

Fibre measurement

Fibres can be measured and documented separately when the cleanliness requirement calls for it.

Metallic / Non-metallic classification

Classification separates relevant particle groups for standards-based and customer-specific evaluation.

Repeatable measurements

Coordinated imaging, calibration and software review improve consistency between operators and test runs.

DeXel-Filtrate® Software Platform

DeXel-Filtrate® turns acquired images into measured, classified and reviewable particle data, then prepares the required customer documentation.

Automatic Particle Detection

The software finds particles across acquired filter images and prepares them for measurement and review.

Particle Measurement

Particle dimensions are measured and organised against the selected cleanliness requirement.

Fibre Measurement

Applicable fibres are measured separately for clear cleanliness documentation.

Metallic / Non-metallic Classification

Particle classes are separated for Technical Cleanliness evaluation and customer reporting.

Image Archive

Stored images give operators a traceable record for review, validation and documentation.

Automatic Report Generation

Completed analysis data flows into repeatable reports without rebuilding the document manually.

Custom Report Templates

Configured templates match the reporting formats required by individual customers and programs.

Manual Validation

Operators can review and validate results before the analysis is approved and reported.

Excel Export

Analysis data can be exported to Excel for further review and internal use.

OEM Database & Analytics

Keep customer specifications, component records and reporting formats connected to the analysis result. Laboratories serving multiple OEMs can recall the right setup, reduce manual entry and deliver the correct customer-specific report.

Customer-specific records

DeXel-Filtrate® stores customer, component, variant, standard, specification and reporting template information.

Multi-OEM workflow

Manufacturers producing for Leading Automotive OEMs, Automotive OEMs and Tier Suppliers, and Global Manufacturing Companies can manage different requirements in one structured system.

Reduced manual setup

Stored specifications help eliminate repeated manual parameter entry and reduce operator errors.

Customer-specific reports

The software generates only the relevant report for the selected customer and component.

particle-analysis-oem-database-analytics.jpg

Recommended source size

1200 × 700 px

Applications

Use particle analysis wherever contamination must be measured, classified and documented before it can affect product quality or reliability.

Automotive

Evaluate component cleanliness against OEM and supplier requirements before contamination affects assembly or function.

EV Components

Document particle contamination in battery, thermal-management and powertrain components used in EV production.

Aerospace

Build traceable cleanliness records for reliability-focused aerospace parts and fluid-system components.

Medical Devices

Review particulate cleanliness within controlled manufacturing and quality-documentation workflows.

Bearings

Measure contamination that can influence surface life, lubrication and precision bearing performance.

Hydraulic Systems

Assess particles in components where contamination can impair valves, pumps and system reliability.

Fuel Systems

Quantify particles in fuel-system components with small passages and contamination-sensitive interfaces.

Precision Manufacturing

Turn cleanliness results into consistent production-control and customer-approval documentation.

Standards

Apply the relevant standard or customer specification without implying product or laboratory certification.

ISO 16232

ISO 16232 defines requirements and methods for technical cleanliness evaluation of road vehicle components.

VDA 19.1

VDA 19.1 is used for technical cleanliness inspection and documentation in automotive cleanliness workflows.

ISO 4406 / ISO 4407

Hydraulic fluid cleanliness classification and particle counting.

ISO 18413

Hydraulic fluid power component cleanliness.

ASTM F312

Particle contamination evaluation where applicable.

OEM-Specific Standards

Support for customer-defined Technical Cleanliness specifications used by global automotive and industrial OEMs.

Why Conation

Conation combines original hardware and software development with application engineering, calibration, training and long-term technical support.

Complete End-to-End Technical Cleanliness Solutions

Work with one application team across extraction, filtration, particle analysis, reporting, laboratory setup and training.

Hardware + Software Integration

Conation integrates the microscope, camera, motion, calibration and software as one measurement system.

OEM Database Management

Stored customer and component specifications simplify recurring OEM-specific analysis and reporting.

Precision Imaging

Matched optics, industrial cameras and stable illumination deliver the image quality required for particle measurement.

Technical Application Support

Application engineers assist with platform selection, installation, calibration, training and ongoing technical questions.

Retrofit Capability for Existing Microscopes

Compatible microscopes can become calibrated automatic particle-analysis systems after a technical review.

Related Solutions

Connect DeXel-Filtrate® with extraction systems, controlled laboratory environments, microscope platforms and complementary image-analysis solutions.

Technical Cleanliness Systems

Particle analysis connects with extraction, filtration and cleanliness reporting workflows.

Learn More

Cleanroom & Laboratory Solutions

Cleanliness-controlled laboratory environments support reliable particle analysis workflows.

Learn More

Metallurgical Microscopy Systems

Knowledge of microscope platforms guides analysis-hardware selection and upgrades.

Learn More

Image Analysis Systems

Particle analysis depends on imaging, measurement, classification and reporting software.

Learn More

Frequently Asked Questions

Select the right particle-analysis platform

Share your particle range, cleanliness standard and reporting requirement with our application engineers.

Request Demonstration