Skip to main content
Conation Technologies

Technical Cleanliness

Economic Extraction Systems

Straightforward trolley and enclosed systems for routine extraction, gravimetry and particle-size checks in the laboratory.

Discuss Economic Systems

economic-extraction-system-hero.jpg

Recommended source size

1600 × 1200

Economic Extraction Workflow

Process

Compact systems combine routine extraction and membrane filtration where test volume and component size remain limited.

  1. 01

    Load part

    Place the component in the trolley or cabinet.

  2. 02

    Rinse or extract

    Apply the specified pressure-rinse or air method.

  3. 03

    Filter

    Collect released contamination on the membrane.

  4. 04

    Vacuum

    Draw the extraction fluid through the filter.

  5. 05

    Dry

    Condition the membrane for measurement.

  6. 06

    Analyze

    Evaluate mass or particle size as specified.

Laboratory-Friendly Extraction

These systems provide controlled pressure-rinse or air extraction for routine work where a PLC cabinet is not required.

Laboratory-friendly footprint

Trolley and compact cabinet formats support laboratory-friendly installation.

Routine cleanliness testing

Recurring extraction checks feed gravimetry and largest-particle-size evaluation.

Cost-effective operation

Economic models support practical adoption for routine laboratories.

Dry extraction option

CTC-M750-Air uses controlled air where solvent contact is prohibited.

Models & Variants

Choose the compact extraction model that matches the component size, extraction route and enclosure requirement.

CTT-Series.jpg

Recommended source size

800 × 600 px

CTT Series

CTT Series

CTT-500 and CTT-1200 are variants of the same economic partially closed trolley platform.

Extraction method
Pressure rinsing
Automation
Control panel with ON/OFF, vacuum start/stop and emergency controls
Component size
Available sizes: 500 and 1200
Best suited for
Medium to larger routine components where TC specifications are relaxed, including gravimetry and largest particle size workflows.

System highlights

  • CTT-500: 600X600X500 rinsing chamber, 50 kg component weight
  • CTT-1200: 1200X1200X700 rinsing chamber, 100 kg component weight
  • 1 solvent tank, 25 Lit
  • Single membrane holder
  • Solvent recirculation and filtration
  • Vacuum system

CTC-M750.jpg

Recommended source size

800 × 600 px

CTC-M750

CTC-M750

Fully enclosed cabinet with manual controls and no PLC.

Extraction method
Pressure rinsing
Automation
Control panel with ON/OFF, vacuum start/stop and emergency controls
Component size
Max 400X400X300 mm; 50 kg
Best suited for
Small and medium components where TC specifications are controlled and particle size distribution is mandatory.

System highlights

  • Rinsing chamber: 600X600X500
  • 1 solvent tank, 25 Lit
  • Single membrane holder
  • Optional fume exhaust
  • Vacuum system

CTC-M750-Air.jpg

Recommended source size

800 × 600 px

CTC-M750-Air

CTC-M750-Air

Fully enclosed cabinet configured for dry extraction.

Extraction method
Air Extraction
Automation
Control panel with ON/OFF, vacuum start/stop and emergency controls
Component size
Max 400X400X300 mm; 10 kg
Best suited for
Small and medium components where solvent extraction is prohibited.

System highlights

  • Rinsing chamber: 600X600X500
  • Specialized loading
  • Air and solvent nozzles
  • Single membrane holder
  • Vacuum system

Selection Guidance

Use component size, extraction route and enclosure needs to select the most suitable economic system.

Routine trolley extraction

Use the CTT Series when an economic trolley platform is suitable; choose CTT-500 or CTT-1200 by component size and weight.

Fully enclosed economic cabinet

Use CTC-M750 where particle size distribution is mandatory but PLC is not required.

No solvent extraction

Use CTC-M750-Air where solvent extraction is prohibited.

Model Comparison

Spreadsheet-backed comparison for economic systems.

Scroll horizontally to compare all models.

CriteriaCTT SeriesCTC-M750CTC-M750-Air
System typeTrolley platformCabinetCabinet
Extraction methodPressure rinsingPressure rinsingAir Extraction
Available sizesCTT-500, CTT-1200CTC-M750CTC-M750-Air
Rinsing chamber600X600X500 or 1200X1200X700600X600X500600X600X500
Max component weight50 kg or 100 kg by variant50 kg10 kg
Fume exhaustNoOptionalNo

Review the deciding requirements.

Share the application, required range and operating conditions. An applications engineer will review the appropriate configuration.

Discuss the Comparison

Applications

Routine laboratory work supported by the CTT and CTC-M750 platforms.

routine-laboratory-checks.jpg

Recommended source size

900 × 600 px

Routine laboratory checks

Repeatable in-house extraction for regular production monitoring.

gravimetry-workflows.jpg

Recommended source size

900 × 600 px

Gravimetry workflows

Component extraction and membrane filtration before weighing.

largest-particle-size-checks.jpg

Recommended source size

900 × 600 px

Largest particle size checks

Practical preparation where the largest released particle is the key result.

solvent-restricted-components.jpg

Recommended source size

900 × 600 px

Solvent-restricted components

Dry extraction with the CTC-M750-Air where solvents are prohibited.

Standards

Standards and OEM requirements guide extraction method, automation and reporting.

ISO 16232:2018

Road vehicles - Cleanliness of components and systems

VDA 19.1:2015

Inspection of Technical Cleanliness for automotive parts

OEM Technical Cleanliness Specifications

Customer-specific cleanliness limits and reporting requirements

Related Extraction Categories

Move between extraction system families without returning to the main overview.

Automatic Extraction Cabinets

Explore

Economic Extraction Systems

Current category

Tabletop Laboratory Solutions

Explore

Customized Extraction Systems

Explore

Manipulator Systems

Explore

Related Solutions

Complete the routine workflow with filtration, gravimetry, particle analysis or a controlled laboratory environment.

Contamination Extraction & Filtration Systems

Compare extraction methods, filtration arrangements and system formats.

Learn More

Particle Analysis Systems

Measure, classify and document particles collected after extraction.

Learn More

Gravimetry Analysis

Determine contaminant mass from a prepared and conditioned membrane.

Learn More

Cleanroom & Laboratory Solutions

Control the environment around extraction, filtration and analysis work.

Learn More

Need an economic extraction system for routine cleanliness testing?

Discuss CTT Series, CTC-M750, CTC-M750-Air and economic cleanliness laboratory needs with Conation.

Talk to an Application Engineer